IWM Injector Gun DK2 With Annular Gap
Simply Efficient
IWM blast gun model DK215% increase in efficiency
Minimum wear
Convenient adjustment
Designed for simplicity and efficiency, IMW's novel DK2 blast gun with annular gap does not require the abrasive stream to be redirected and therefore achieves a significant improvement in energy efficiency.
- Compared to conventional blast guns, up to 15% increase in blasting efficiency for the same amount of air or up to 15% energy savings for the same surface coverage.
- Redundancy of air jet or auxiliary nozzles minimises wear of the gun body.
- Minimum wear of outer gun surfaces, gun body made from sturdy PU.
- Threaded adjustment of the blast nozzle for convenient setting of blast intensity.
Replacement parts for DK2 injector gun with annular gap
Item No. |
Description | Part No. | |
1 | Boron carbide blast nozzle | 06 mm with male thread M 30 x 1.5 08 mm with male thread M 30 x 1.5 10 mm with male thread M 30 x 1.5 12 mm with male thread M 30 x 1.5 |
A01.01.3190-6 A01.01.3190-8 A01.01.3190-10 A01.01.3190-12 |
2 | Lock nut PU | 982700345-02 | |
3 | Gun body PU | With female thread M 30 x1.5 With air line fitting NW 13 |
982700345-03 |
4 | Abrasive nozzle | 06 mm tempered 08 mm tempered 10 mm tempered 12 mm tempered |
82700306H 82700308H 82700310H 82700312H |
Abrasive nozzle | 06 mm carbide 08 mm carbide 10 mm carbide 12 mm carbide |
82700306HM 82700308HM 82700310HM 82700312HM |
|
5 | Double-ear hose clamp | 24-27 zinc-plated | 0208950 |
6 | Double-ear hose clamp | 19-21 zinc-plated | 0464750 |