Manual Pressure Blast Cabinets Model DP

Compact Pressure Blast Cabinet Model DP

Used with appropriate blast media such as alumina, glass or plastic beads, Normfinish DP injection blast cabinets are ideally suited for many applications such as roughening, rust removal, deburring, matting and polishing of a multitude of components.

Key Features At A Glance:

• Suitable for all conventional abrasives
• Ergonomic design, no ramp or pit required
• Convenient change of abrasives
• Additional cleaning of blast media by means of a cyclone separator
• Automatic (timed) filter cleaning
• Highly robust, rugged and ergonomic design with a load capacity of up to 1,000 kg for models DP17 and DP22 (options available for heavier loads)
• Two large access doors with safety system (prevents blasting when doors are open)
• Adequately fulfils the NER standard (=dust emission)
• If you require more detailed information, wish to receive a demonstration or would like to run life tests, please do not hesitate to contact us!

Options:

A wide range of options is available to further enhance the cabinets' versatility. The most popular options are

• Rotating cage for automated blasting of small components
• Rotary table facilitating the rotation of heavy components; also available with rail system
• Lead-through openings for excess-length parts
• Multiple blast guns

Conventional manual blast cabinets are equipped with a funnel integrated into the cabinet, collecting the spent blast media together with dust, dirt and debris. During operation, the contaminated abrasive is aspirated and reused without prior cleaning, causing poor visibility inside the cabinet (dust), extended blast cycles (low granularity), contaminated components, etc.
Contrary to this, Normfinish DP cabinets are equipped with a cyclone separator to allow for additional cleaning and optimum preparation of the blast media and to provide clear visibility inside the cabinet. A welcome side effect of this unique design is the cabinets' ergonomic working height.

Specifications Model DP

Model		DP 12	DP 14	DP 17	DP 22
Blast chamber dimensions	Width	1.110 mm	1.370 mm	1.700 mm	2.200 mm
	Depth	930 mm	1.020 mm	1.400 mm	1.400 mm
	Height	830 mm	890 mm	1.100 mm	1.100 mm
Cabinet dimensions	Width	1.250 mm	1.550 mm	1.750 mm	2.250 mm
	Depth	1.530 mm	1.620 mm	2.040 mm	2.040 mm
	Height (incl. motor)	2.080 mm	2.150 mm	2.020 mm	2.020 mm
Door opening	Width	830 mm	920 mm	1.290 mm	1.290 mm
	Depth	720 mm	780 mm	990 mm	990 mm
Floor grating	Working height	810 mm	810 mm	790 mm	790 mm
Weight	approx.	510 kg	705 kg	1.180 Kg	1.430 Kg
Air consumption		± 3.000 Ltr./min. at 4 bar and blast nozzle 8 mm	± 3.000 Ltr./min. at 4 bar and blast nozzle 8 mm	± 3.000 Ltr./min. at 4 bar and blast nozzle 8 mm	± 3.000 Ltr./min. at 4 bar and blast nozzle 8 mm