Manual Injection Blast Cabinets Model DI
Manual Injection Blast Cabinets Model DI
Used with appropriate blast media such as alumina, glass or plastic beads, Normfinish DI and Junior series injection blast cabinets are ideally suited for many applications such as roughening, rust removal, deburring, matting and polishing of a multitude of components.
Key Features At A Glance:
- Suitable for all conventional abrasives
- Convenient change of abrasives
- Additional cleaning of blast media by means of a cyclone separator (DI models)
- Automatic (timed) filter cleaning
- Highly robust, rugged and ergonomic design with a load capacity of up to 350 kg (options available for heavier loads)
- Two large access doors with safety system (prevents blasting when doors are open)
- Adequately fulfils the NER standard (=dust emission)
Options:
A wide range of options is available to further enhance the cabinets' versatility. The most popular options are:
- Rotating cage for automated blasting of small components
- Rotary table facilitating the rotation of heavy components; also available with rail system
- Lead-through openings for excess-length parts
- Multiple blast guns
Conventional manual blast cabinets are equipped with a funnel integrated into the cabinet, collecting the spent blast media together with dust, dirt and debris. During operation, the contaminated abrasive is aspirated and reused without prior cleaning, causing poor visibility inside the cabinet (dust), extended blast cycles (low granularity), contaminated components, etc.
Contrary to this, Normfinish DI cabinets are equipped with a cyclone separator to allow for additional cleaning and optimum preparation of the blast media and to provide clear visibility inside the cabinet. A welcome side effect of this unique design is the cabinets' ergonomic working height.
Specifications Model DI
|
Model | DI 12 | DI 14 | |
Blast chamber dimensions |
Width | 1.110 mm | 1.370 mm |
Depth | 800 mm | 890 mm | |
Height | 740 mm | 810 mm | |
Cabinet dimensions |
Width | 1.250 mm |
1.550 mm |
Depth | 1.280 mm | 1.380 mm | |
Height (incl. motor) | 1.970 mm | 2.045 mm | |
Door opening |
Width | 690 mm | 790 mm |
Depth | 620 mm | 690 mm | |
Bodenrost |
Working height | 810 mm | 810 mm |
Weight |
approx. | 350 kg | 480 kg |
Air consumption | ± 800 1.000 Ltr./min. at 6 bar and Ø 8 mm |
± 800 1.000 Ltr./min. at 6 bar and Ø 8 mm |